![]() EnvelopeNo10_Personal (or DL instead of 10), and select a category, e.g. In the dialog window that opens Write a name, e.g. Add it your Templates folder, File | Templates | Save as Template.The printer dialog will open, select the envelope size in the paper size settings, so # 10, COM-10 or similar name (DL for the DL template) and probably select Landscape and also the printer Tray if needed (you might need to check with your printer manual for these settings). To print a 10 envelope, pull down the File menu and select Template Open Templates Envelope Your Template Name (e.g. In the menu click File | Printer Settings, in the window that opens, select your printer from the drop down box and click Properties. ![]() With the template above downloaded and open I have a template I use, so here it is in DL and in #10: DL_Envelope.ott & No10_Envelope.ott ![]() OK out” as you will need to set up your printer for the template. Click Properties and set paper size to # 10 (DL if using DL), orientation to Landscape. I need to re-iterate the bit about “In menu click File | Printer Settings… In window choose the printer. If you are using A4 paper then DL envelope is normal, for Letter then No 10 envelope. Make sure to avoid letting any text or graphics display in the.375 non-printable area. Use one page for the front with appropriate measurements. Open the template file in your design or layout program. You need a margin of 12 mm (half inch) at the left and 24 mm (one inch) at the right. Make sure that your next envelope printing project starts off on the right foot with this downloadable template. ![]() Having said that they are centred in the paper tray so should not print with an offset. Hi I have to say the manual for your printer is a bit unclear on which orientation to load the envelopes. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |